| |
 Diamond Flaws and Inclusions
Internal Diamond Flaws
When a diamond is considered to have a flaw, it is an imperfect gem stone. Something about the diamond did not form correctly, or there are tiny imperfections within the stone. Diamond flaws and inclusions are often not noticeable to the average person, and you need not worry about the small inclusions that occur in most diamonds. There are actually only very few diamonds which can be labeled "perfect", and if they are placed in the category of no diamond flaws and inclusions, chances are the diamond will be extremely expensive!
There are some minor inclusions
which cause a diamond to appear slightly dull. The inclusion within the diamond can affect the stone's clarity because as light passes through the stone, it is intercepted by the inclusion. Many of these flaws and inclusions can be reduced or fixed with the various forms of treatment processes that gemologists and jewelers have learned to do over the years.
Other diamond flaws and inclusions may be large enough to cause weakness within the gem stone, and the stone could shatter or break much more easily than a stone without the weakness. These are the flaws you want to be careful with, since they reduce the value of your stone.
Pinpoint Inclusions
When a diamond has speckles of dark crystals in groups or scattered throughout the stone, it is said to havea form of diamond flaws and inclusions called pinpoint inclusions. If the dark crystals are all clustered together in the stone, the clarity of the diamond is effected, and it appears to have a "cloud" inside the stone. These types of diamond flaws and inclusions may cause the diamond to be worth less, as it greatly effects the appearance.
Problems from Laser Treatments
When an imperfect diamond is treated with lasers to remove dark diamond flaws and inclusions from within the gemstone, sometimes a line is left through the diamond that looks much like a thread. The laser line begins at the outer edge of the diamond, and moves inward to the area where the dark inclusion was treated by the laser. These diamond flaws and inclusions are unsightly and easily spotted by most people, making the diamond less desirable.
Mineral and Crystal Inclusions
While most diamond flaws and inclusions are negative, there are instances when the diamond flaws and inclusions are actually an eye catching aspect of your diamond! For example, diamonds typically have smaller crystals inside the diamond, often so tiny they cannot be seen without some sort of magnifying device. The clarity of the diamond can be effected by these crystals, if there are enough of them and if they are all grouped together in one area of the diamond.
There are a few rare instances when another gem stone is actually inside a diamond, and could certainly not be seen as a diamond flaw or inclusion. For example, if you had a ruby or emerald that was surrounded by a diamond, you would see that as a special piece of jewelry- not a flawed one!
How to Buy a Diamond
Diamond Facts The first diamonds were mined in India, more than 2800 years ago. The diamonds that we find today are all extremely old. In fact, most are 900 million years old or more, with the oldest known diamond being 3.2 billion years old....
How to Care for Your Diamond
Caring for a diamond takes more than occasional cleanings. Diamonds are forever, but they can be damaged if you are not careful. By learning how to properly care for your diamond, you will ensure that your diamond is indeed forever. ...
Selecting Diamonds
Diamonds are graded for certification by laboratories using grading criteria. Four of these criteria are critical to understand when making a diamond purchase or investment. Known as the "Four C's" these criteria are: color, cut,...
How Diamonds Are Cut
In their most natural form, diamonds are - well - quite ugly. They have no luster or shine, and in fact, look like nothing more than broken glass. A diamond must be cut, and then polished before it actually becomes a thing of beauty. ...
Treated Diamonds
Why Treated Diamonds Exist For centuries, people have always tried to improve objects that are a result of nature. We've cross bred plants and even animals to produce new species, and we prune and shape trees and bushes to make them more...
|
|
|
|
|